Knowledgebase: SSL Certificates
To install the QuickSSL Premium Smart Icon seal, simply add the following lines to each web page on which you want the QuickSSL Premium seal to appear:

<!-- GeoTrust QuickSSL [tm] Smart Icon tag. Do not edit. -->
<SCRIPT LANGUAGE="JavaScript" TYPE="text/javascript" SRC="//smarticon.geotrust.com/si.js"></SCRIPT>
<!-- end GeoTrust Smart Icon tag -->


These instructions will retrieve your QuickSSL Premium registration data from the QuickSSL Premium registry server and cause the QuickSSL Premium seal to be displayed on your web page. Remember, the web page on which you place this QuickSSL Premium seal must use exactly the same domain that is in your QuickSSL Premium enrollment application. For instance, if the enrollment is for www.example.com, then the QuickSSL Premium registration is for that site, and does not include other fully qualified domains like www2.example.com.


Important note: Use of the QuickSSL Premium service is subject to the terms and conditions of the QuickSSL Premium Subscriber Agreement. You must agree to those terms and conditions if you use the QuickSSL Premium service. You are indicating your acceptance of that agreement by installing theQuickSSL Premium smart icon on your Web site.


QuickSSL Premium Sample Site Seal

This GIF is a sample snapshot of the QuickSSL Premium site seal. The actual site will disable right click and save features and will display a live date / time stamp much like the True Site displayed on the bottom of this page



FrontPage installation:
In order to properly install your QuickSSL Premium seal on your website using FrontPage you will need to follow one of the two procedures below. Otherwise FrontPage will change the HTML code for the seal, causing the icon to function improperly.


Method 1
One way to add the Tag with Frontpage 2000 is as follows:
1) Open the html page (*.htm, *.html, *.asp, or whatever) and put the cursor where you want the icon to appear


2) In the main menu, choose Insert -> Web Component -> Advanced Controls -> HTML to open up the HTML Markup dialog

3) Paste the second line (the non-comment line) of the Tag into the dialog as shown below in Figure 1 and click OK.


4) Save the file (in the menu File->Save, or press CTRL-S)


<!-- webbot bot="HTMLMarkup" startspan -->
<SCRIPT LANGUAGE="JavaScript" TYPE="text/javascript" SRC="//smarticon.geotrust.com/si.js"></SCRIPT>
<!-- webbot bot="HTMLMarkup" endspan -->

The opening and closing webbot comments seem to prevent "file:" from being added when the page is opened and then saved in Frontpage.


Method 2
The other way to essentially accomplish the same thing is to open the HTML source file in a text editor such as Notepad and add the webbot comment lines manually. Before the Tag, add:


<!-- webbot bot="HTMLMarkup" startspan -->


And after the Tag, add:


<!-- webbot bot="HTMLMarkup" endspan -->


So that your HTML source looks like:


<!-- webbot bot="HTMLMarkup" startspan -->


<!-- GeoTrust QuickSSL [tm] Smart Icon tag. Do not edit. -->
<SCRIPT LANGUAGE="JavaScript" TYPE="text/javascript" SRC="//smarticon.geotrust.com/si.js"></SCRIPT>
<!-- end GeoTrust Smart Icon tag -->


<!-- webbot bot="HTMLMarkup" endspan -->

How do I install Premium Smart Icon seal?
Posted by Alpha Daramy on 18 August 2008 04:15 PM
(214 vote(s))
Helpful
Not helpful

Comments (0)